Skip to main content
 Back to list

UNIGATE CL PROFIBUS

Classification:
Product name:
UNIGATE CL PROFIBUS

Order number:
V3553

Shortdescription:
Protocol converter UNIGATE CL - a solution for all devices with a serial interface

Product types:
Link/Coupler/Gateway/Proxy

Technology & Profiles:
PROFIBUS

Certification number:
PROFINET Z10430

Company:
Deutschmann Automation GmbH & Co. KG

Carl-Zeiss-Str. 8
65520 Bad Camberg
Germany

Michael M. Reiter
Tel +49 6434 9433 0
www.deutschmann.de
info(at)deutschmann(dot)de

Illustration:
Product description:

The Protocol Converter UNIGATE CL connects devices such as automation components via their serial interfaces to the required fieldbus or industrial Ethernet standard. RS232, RS485 and RS422 interfaces are on Board as a standard feature.

The communication between the serial side and the bus takes place either through the device configuration and a selection of the commercially available protocol, such as Modbus ASCII, Modbus RTU (Master or slave), 3964 (R) (e. g. for RK512) or the device is controlled by a script for protocols such as DIN measuring bus, DIN 19244 or other proprietary protocols.

This Script is created with the free PC tool, ‘Protocol Developer’. You decide whether you want to program the Script yourself or hire Deutschmann Automation to do so.

A special feature of the UNIGATE CL series is Brand labeling. With the customized design Deutschmann Automation not only gives you the opportunity to pre-configure the device and choose different housing colors, you can also apply your own logo.

 

Overview: 

  •  Available for most fieldbus and Industrial Ethernet versions
  • RS232, RS485- and RS422 interfaces are on Board
  • When using the RS485 interface, multiple terminal devices can be used on a Protocol Converter
  • Same design on the serial side in all bus versions
  • The fieldbus or Ethernet side meets the standards, respectively the standard market models.
  • Brand labeling
  • Adaptation of the terminal device firmware is not required
  • Modern, slim DINrail
  • Same dimensions in all bus variants
  • Wide voltage rane from 10 to 33 VDC
  • Built-in isolation on the bus side, optionally on the serial side
  • Configuration of the module via configuration tool WINGATE
  • Modbus RTU (Master/Slave)
  • Modbus ASCII (Master/Slave)
  • up to 24 Modbus requests configurable
  • 3964(R) protocol
  • Transparent protocol
  • SSI protocol for transducer (gray code or binary code)
  • Pre-configured according to customer
  • Free programming with Protocol Developer (Deutschmann Script language)
  • Replica of proprietary protocols
  • Additional debug interface on board

 

 
 Data sheet

  • Complete PROFIBUS-DP-Slave interface
  • Automatical Baud rate recognition (9600 bit/s - 12 Mbit/s)
  • DPV0 and DPV1 supported
    • Isolated PROFIBUS interface with 9-pin. D-sub connector
    • PROFIBUS address adjustable via rotary switch
  • Up to 244 Bytes input- and 244 Bytes ouput data (total data length 488 Bytes)RS232/RS485/RS422 up to 625 kBaud
  • Dimensions (WxDxH in mm): 23 x 117 x 111 (screw-plug-connector included), 23 x 117 x 100 (screw-plug-connector not included)
  • Weight: approx. 123 g
  • Protection class: IP20
  • Power supply: 10 up to 33 Volt DC
  • Protection against incorrect polarity, short circuit and overload integrated
  • Current consumption (at +24V/DC): typ. 70mA, max. 80mA
  • Operating temperature: -40°C (non condensing) up to +85°C
  • Storage-/transport temperature: -40°C ... +85°C
  • Fieldbus functions: All specified PROFIBUS DP Slave functions
  • Technology: ASIC
  • Certifications: PROFIBUS, CE
  • Galvanic division: Optional for the serial side, standard on the bus side
  • Options: Galvanic division for the application side
 Back to list

Unsere bekannten Technologien

PROFIBUS

 

PROFIBUS ist ein standardisiertes, offenes, digitales Kommunikationssystem für alle Anwendungsbereiche der Fertigungs- und Prozessautomatisierung.

 

 

PROFINET Logo

 

 

PROFINET ist der innovative offene Standard für Industrial Ethernet. Es erfüllt alle Anforderungen der Automatisierungstechnik.

 

 

IO-Link -die Sensor/Actor Interface Lösung

 

 

 

IO-LINK ist eine eigenständige Sensor/Aktor-Interface-Lösung für den Einsatz in allen Automatisierungstechniken.

 

 

omlox - locating technology

 

 

 

Omlox ist ein offener Technologiestandard für Echtzeit-Indoor-Lokalisierungssysteme in der industriellen Fertigung.