Skip to main content

PROFIBUS Technology Training

Mariana Rado,
  • 15.01.2019 - 17.01.2019
  • 12.03.2019 - 14.03.2019
  • 22.10.2019 - 24.10.2019

Course Content
This 3-days course provides a basic understanding of PROFIBUS technology for the process automation industry.

The course is designed for field service engineers/technicians. It is mandatory that the participant bring a laptop (preferably his/her own service laptop) to the course with the latest version of FieldCare and DTMs installed.

Learning Objectives
1. Commissioning:
• Able to wire up an individual field device to the network
• Able to wire up a fieldbus segment to the network
• Able to assess the quality of the as-built fieldbus physical layer
• Able to configure FieldCare for use on a running system(cyclic/acyclic requirements)
• Able to use FieldCare to set the necessary parameters in a field device
• Able to integrate a field device into a DCS at a very basic level (module/slots)

2. Maintenance:
• Able to exchange a field device on a running system without shooting down the bus communication
• Able to make appropriate suggestions about improving a customer`s physical layer

3. Diagnosis
• Able to troubleshoot the fieldbus physical layer using the most important tools available on the market at the time of the course

Endress+Hauser specialists, service technicians and product managers

This course consists of both theoretical and hands-on exercises to ensure that the training objectives are met. The hands-on part is over 50% of the course. There will be a theoretical and practical assessment as part of the course. Participants must achieve a passing grade to qualify for certification.


Per person: 1'336- EUR / 1'550,- CHF. Includes Lunch, break refreshments, course material and one evening event.

More fieldbus course offer see:

Contact and Registration

Mariana Rado
Endress+Hauser Process Solutions AG
Christoph Merian-Ring 12
CH-4153 Reinach

Phone: +41 61 715 73 78



12/08/2019CP01238S_04_DE_03.19.pdfpdf5 MB
12/08/2019CP01238S_04_EN_03.19.pdfpdf5 MB
 Back to list

Unsere bekannten Technologien


PROFIBUS ist ein standardisiertes, offenes, digitales Kommunikationssystem für alle Anwendungsbereiche der Fertigungs- und Prozessautomatisierung.





PROFINET ist der innovative offene Standard für Industrial Ethernet. Es erfüllt alle Anforderungen der Automatisierungstechnik.





IO-LINK ist eine eigenständige Sensor/Aktor-Interface-Lösung für den Einsatz in allen Automatisierungstechniken.